Deif AL8-2 User Manual

AL8-2 – Programming manual
4189320003D
Page 3/19
On delivery, the AL8-2 alarm panel is programmed to the following functions:
Individual functions
• Alarm on closed signal contact (N/O)
• No activation of output relays A and B on an alarm condition
• Inhibit function NOT activated
• No alarm on cable failure
•
Immediate registration of an alarm condition (i.e. time delay 0 sec.)
Common functions
• Output relays A and B activated on an alarm condition (N/O)
• Duration of activation is unlimited (i.e. time limit 0 sec.)
• No delay of cancellation of inhibit function (i.e. time delay 0 sec.)
BEFORE YOU START PROGRAMMING
Programming the DEIF alarm panel AL8-2 requires only few and simple preparations:
Firstly, auxiliary voltage should be connected (indicated by green light in the LED
marked "POWER ON").
CONNECTIONS

Deif AL8-2 Specifications

General

Brand	Deif
Model	AL8-2
Category	Security System
Language	English