Deister electronic proxSafe flexx - ProxSafe Emergency Cylinder Unlock

To Next Page

To Previous Page

proxSafe flexx

ps_flexx_wi_en

V08/09/09

6. Emergency Unlock of proxCylinders

If normal operation failed (e.g. the processor does not work) to get the keyTags out, there

is a possibility of unlocking each single proxCylinder by hand for manual keyTag release.

In this case the service door of the flexx has to be opened first (see 3.2 Open flexx). Each

single proxCylinder is equipped with a little metal lever on its own, which can easily be

reached from the inside. Now this lever has to be pressed down to unlock the proxCylinder

and then release the keyTag.

Press down the lever of the proxCylinder by

hand for manual keyTag release.