V1213, 3.15
3.5. Surface or bend line marker
With the marker function a specific surface or bendline can be marked improving the
recognition specific of sides and bendlines.
Functions
Set marker
One can select and point at a specific point in the product to place the marker. A cylindrical
"label" will be placed at the point of insertion. The marker can be moved to a new position by
setting the marker on a new position.
This marker will be shown in Automatic mode.
Flip marker
The top/bottom colors can be swapped if this would suite the situation better.
Remove marker
Remove the marker from the product.
To Next Page
Loading...
