DelfiScan
Programming Manual
Configure Your DelfiScan
40
PROGR
AM
Operation Control
SmartStand Power Off & Presentation Auto-sense
M_DEF
AULT
Family Code Selection P.C Parameter Selection Option Code
SmartStand Power Off
Timeout
SS
SS
SS
3 mins
5 mins
10 mins
Only available for DelfiScan Laser model
0
1
2
Presentation Scanning
Auto-sense
SS
SS
Disable
Enable
0
1
The SmartStand Power Off Timeout is a pre-defined duration for scanner placed in SmartStand. While the scanner is placed in SmartStand, the
scanner’s built-in sensor will switch the scanner from hand-held scanning to presentation scanning and the light source will be forc
ed on
automatically. The light source will be off
when the pre-defined power off duration
is up.
The
Presentation Scanning
Auto-sense
can auto switch the presentation scanning and hand-held scanning by us
ing the SmartStand.
To Next Page
Loading...