Dell EMC Boot Optimized Server Storage-S1 - iDRAC;Lifecycle Controller Updates & Resources

Table 4. Supported SubDevice ID
SubDevice ID Firmware Binary Image
1FD6 (Monolithic) ImageA1_1FD6.bin
1FE2 (Monolithic) ImageA1_1FE2.bin
1FDF (Modular) ImageA1.bin
4 Provide user permissions to that entire folder.
5 To install BOSS-S1, run ./install.sh, followed by ./mvcli.
6 To ash the rmware, run the command flash –a update –f ImageA1_xxxx.bin –t raw in the CLI shell.
7 Exit and reboot the system, and verify the rmware version.
NOTE: Administrator privileges for Windows and Root/Sudo for Linux are recommended.
Firmware update using iDRAC
To update the rmware using the iDRAC web interface:
1 Download the latest DUPSAS- RAID_Firmware_xxxxx_xxxx_xxx.exe from the Dell.com/support.
2 Enter the iDRAC web interface and click on the Maintenance.
3 Click System Update.
4 Select the EXE Dell Update Package (DUP).
5 Upload the le, and then click Install > Reboot.
6 Log in and verify the installed rmware version in HII, iDRAC, or BOSS-S1 CLI.
Firmware update using Lifecycle Controller
To update the rmware using the Lifecycle Controller:
1 Download the DUP le from the Dell.com/support and copy the .exe DUP le to a local drive.
Example of the le name: SAS- RAID_Firmware_xxxxx_xxxx_xxx.exe.
2 Open Virtual Console and boot into Lifecycle Controller by pressing F10 at boot time.
3 Select Get the Latest rmware on the dashboard window.
4 Select Local Drive (CD/DVD/USB).
Enter the name of EXE le and select Update.
5 After successful installation, reboot and verify the installed rmware version in the HII, iDRAC, or BOSS-S1 CLI.
NOTE
: BOSS-S1 rmware update through iDRAC/Lifecycle Controller is supported only on rmware version A01 and above.
For more information see Updating BOSS-S1 controller rmware using iDRAC or LC fails.
NOTE: For Information on how to update using the CLI, see BOSS-S1 CLI commands.
Related documentation
NOTE
:
• For all Dell OpenManage documents, go to Dell.com/openmanagemanuals.
• For all operating system documents, go to Dell.com/operatingsystemmanuals.
• For all PowerEdge documentation, go to Dell.com/poweredgemanuals.
Overview 11