Dell EMC Boot Optimized Server Storage-S1 - Removing the M.2 SSD Module from the BOSS-S1 Card

Figure 3. Removing the BOSS-S1 adapter card
1 BOSS-S1 adapter card 2 card connector on the system board
Figure 4. Removing the BOSS-S1 modular card
1
BOSS-S1 modular card 2 card connector on the system board
Removing the M.2 SSD module from the BOSS-S1 card
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Turn o the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
Deploying the BOSS-S1 card
15