Dell EMC Boot Optimized Server Storage-S1 - Page 16

NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of
the system.
2 Open the system.
3 Remove the BOSS-S1 card from the system. See Removing the BOSS-S1 card.
4 Remove the screw that secures the M.2 SSD module to the BOSS-S1 card.
5 Slide and remove the M.2 SSD module away from the card.
Figure 5. Removing the M.2 SSD module from the BOSS-S1 adapter card
1
module connector (2) 2 screw (2)
3 M.2 SSD module (2)
Figure 6. Removing the M.2 SSD module from the BOSS-S1 modular card
1
module connector 2 M.2 SSD module
16 Deploying the BOSS-S1 card