Dell EMC Boot Optimized Server Storage-S1 - Installing the M.2 SSD Module and BOSS-S1 Card

Installing the M.2 SSD module on BOSS-S1 card
CAUTION: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Align the M.2 SSD module connectors with the connectors on the card.
2 Tilt the M.2 SSD module downwards until the module is seated rmly on the card.
3
CAUTION: To avoid damage to the card, ensure that you do not over tighten the screw.
Tighten the screw to secure the M.2 SSD module to the card.
Figure 7. Installing M.2 SSD module on the BOSS-S1 card
1
module connector (2) 2 screw (2)
3 M.2 SSD module (2)
Deploying the BOSS-S1 card 17