4. Slide and remove the solid-state drive/Intel Optane from the solid-state drive/Intel Optane slot.
Replacing the solid-state drive/Intel Optane
Enable the Intel Optane device after you replace it. For more information about enabling the Intel Optane device, see Enabling Intel Optane
memory.
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure to replace the M.2 2230 solid-state drive
1. Place the solid-state drive into the slot on the back of the solid-state drive shield.
2. Replace the screw (M2x2) that secures the solid-state drive to the solid-state drive shield.
Removing and installing components
29
To Next Page
Loading...
