Dell EMC Inspiron 3493 - Display Panel

Post-requisites
1. Replace the display bezel.
2. Replace the display assembly.
3. Replace the wireless card.
4. Replace the base cover.
Display panel
Removing the display panel
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the fan.
4. Remove the display assembly.
5. Remove the display bezel.
Procedure
1. Remove the four screws (M2x2) that secure the display panel to the display back-cover and antenna assembly.
Removing and installing components
65