LED Description
FAN LED
• O - system o or in standby
• Solid green—Normal operation; fan powered and running at the
expected RPM
• Solid yellow—Fan failed
PSU LED
• O—No power
• Solid green—Normal operation or standby mode
• Solid yellow—Power supply critical event causing a shutdown
• Flashing yellow—PSU warning event; power continues to
operate
LOCATOR LED/System Beacon
• O—Locator function disabled
• FFlashing blue with 1 sec on and 1 sec o – Locator function
enabled
• Flashing blue with 2 sec on and 1 sec o – system in standby
Temperature status LED
• O - system o or in standby
• Solid green—temperature is normal
• Solid yellow—temperature is at the limit
• Flashing yellow—temperature is over the limit
RJ-45 Ethernet LED
• O—no link and no activity detected
• On—Activity on the port
• Solid yellow—Link operating at a lower speed
• Solid green—Link operating at a maximum speed—1G
• Flashing green—Port activity
Table 2. System management Ethernet port LEDs
LED Description
Link LED
• O—No link
• Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
• Solid yellow—Link operating at a lower speed, autonegotiated/
forced or 10/100M
Activity LED
• O—No link
• Flashing green—Port activity
Table 3. SFP+ port LEDs
LED Description
Link/Activity LED
• O—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operating at a lower speed, 1G
• Flashing green—port activity for 10G
• Flashing yellow—port activity for 1G
10 VEP4600 platform
To Next Page
Loading...
