Dell EMC VEP4600 - 8 Specifications; Chassis Physical Design

Specications
This section lists the VEP4600 specications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance .
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• Safety standards and compliance agency certications
• Product recycling and disposal
Chassis physical design
Table 4. Chassis physical design
Parameter Specications
Height 1.72 inches (43.6 mm)
Width 17.1 inches (434 mm)
Depth
15 inches (381 mm)
PSU/fan tray handle: 1.57 inches (40 mm)
Chassis weight with factory-installed components
• 13.75 lbs (6.24 kg) (1 PSU and 4 fans)
• 13.90 lbs (6.30 kg) (1 PSU and 5 fans)
• 15.75 lbs (7.14 kg) (2 PSUs and 5 fans)
Rack clearance required
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
Table 5. Environmental parameters
Parameter Specications
Operating temperature 0°C to 45°C (32°F to 113°F) continuously
NOTE: Reduce maximum temperature by 1°C/125 meters
(1°F/228 feet) above 950 meters (3,117 feet).
Operating humidity 5% to 85% (RH), non-condensing, continuously
8
Specications 29