About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your platform,
inserting modules, and connecting to a power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualied personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
WARNING: When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical transceiver
ports. Avoid exposure to laser radiation. Do not stare into open apertures.
Regulatory
Marketing model VEP4600 is represented by the regulatory model E25W and the regulatory type E25W001.
Topics:
• Related documents
• Information symbols
Related documents
For more information about the Virtual Edge Platform 4600 (VEP4600), see the following documents:
• VEP4600 Setup Guide
• VEP4600 Release Notes
• VEP4600 Expansion Cards Release Notes
• VEP4600 Technical Guide
• VEP4600 Insert
• VEP4600 Diag Guide
• VEP4600 BIOS User Guide
• VEP4600 BMC User Guide
NOTE
: For the most recent documentation, see https://www.dell.com/support .
1
About this guide 5
To Next Page
Loading...
