Dell 8 - Page 121

About Your System 121
The amount of
system memory has
changed.
Faulty memory module. See "Troubleshooting Blade
Memory" on page 297. If the
problem persists, see
"Getting Help" on page 337.
This system does
not support
processors greater
than 95W.
Unsupported processor(s)
installed.
Replace the processor(s)
with a supported version.
See "Processors" on
page 225.
Time-of-day clock
stopped.
Faulty battery; faulty blade
board.
See "Troubleshooting Blade
Memory" on page 297. If the
problem persists, see
"Getting Help" on page 337.
Time-of-day not
set — please run
SETUP program.
Incorrect Time or Date
settings; faulty blade board
battery.
Check the Time and Date
settings. See "Using the
System Setup Program
and UEFI Boot Manager" on
page 127. If the problem
persists, see
"Troubleshooting the
NVRAM Backup Battery" on
page 302.
Timer chip counter
2 failed.
Faulty blade board. See "Getting Help" on
page 337.
TPM failure A Trusted Platform
Module (TPM) function
has failed.
See "Getting Help" on
page 337.
Table 1-26. Blade Messages
(continued)
Message Causes Corrective Actions