Dell 8 - Poweredge M710 HD System Board

324 System Board Information
PowerEdge M710HD System Board
Figure 7-5. PowerEdge M710HD System Board Connectors
Table 7-12. PowerEdge M710HD System Board Connectors
Connector Description
1 LOM RISER Network Daughter Card/LOM Riser card connector
2 MEZZ2_FAB_B Mezzanine card connector 2 Fabric B
3 A1 – A9 Memory modules A1 – A9
4 CPU2 Processor 2 socket
5 - Connector for the 3.0-V coin battery
NOTE: Access requires removal of system board. See
"Removing the System Board" on page 255.
6 - Hard-drive backplane connector
7 B1 – B9 Memory modules B1 – B9
8 CPU1 Processor 1 socket
9 MEZZ1_FAB_C Mezzanine card connector1 Fabric C
10 MANAGEMENT
RISER
Connector for internal dual SD module
1
2
34
9
7
10
8
6
5