Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Place the battery on the palm-rest assembly, and align the screw holes on the
battery with the screw holes on the palm-rest assembly.
2 Replace the four screws (M2.5x5) that secure the battery to the palm-rest
assembly.
101
To Next Page
Loading...
