Replacing the power-button board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Place the power-button board on the palm-rest assembly, and align the screw
holes on the power-button board with the screw holes on the palm-rest
assembly.
2 Replace the two screws (M2x3) that secure the power-button board to the
palm-rest assembly.
90
To Next Page
Loading...
