5 Replace the 17 screws (M2x3) that secure the keyboard bracket to the palm-
rest assembly.
Post-requisites
1 Replace the battery.
2 Replace the power-adapter port.
3 Follow the procedure from step 2 to step 18 in “Replacing the system board”.
4 Replace the subwoofer.
5 Replace the I/O board.
6 Replace the coin-cell battery.
7 Replace the computer base.
8 Replace the rear-I/O cover.
9 Replace the memory modules.
10 Replace the solid-state drive.
11 Replace the wireless card.
12 Follow the procedure from step 4 to step 7 in “Replacing the hard drive”.
115
To Next Page
Loading...
