50
Operating the monitor
Icon Menu and submenus Description
USB CHARGING Allows you to enable or disable the USB CHARGING function during monitor Standby
Mode.
FAST WAKEUP Speeds up recovery time from standby mode.
RESET
PERSONALIZATION
Resets all settings under the PERSONALIZE menu to the factory defaults.
OTHERS Changes the OSD settings, such as the DDC/CI, SELF-DIAGNOSTIC and so on.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor
settings using software on your computer. Select OFF to turn off this feature.
Enable this feature for the best user experience and optimum performance of your monitor.
LCD CONDITIONING Helps to reduce minor cases of image retention. Depending on the degree of image
retention, the program may take some time to run. To start LCD CONDITIONING, select
ON.
SELF-DIAGNOSTIC Allows you to check if your monitor is functioning properly.
RESET OTHERS Resets all settings under the OTHERS menu to the factory preset values.
FACTORY RESET Resets all OSD settings to the factory defaults.
To Next Page
Loading...
