Dell ALIENWARE AURORA - GAMING MACHINE - ALIENWARE AURORA - Replacing the Top I;O Panel

0105
0105
/
CHAPTER 21: TOP I/O PANEL
Replace the PCI-fan assembly (see “Replacing the PCI-Fan Assembly” on 10.
page 45).
Replace the drive-bay shroud (see “Replacing the Drive-Bay Shroud” on 11.
page 19).
Close the PCI shroud (see “Closing the PCI Shroud“ on page 12. 18).
Replace the left side-panel (see “Replacing the Left Side-Panel” on page 13. 11).
Connect your computer and devices to electrical outlets and then turn 14.
them on.
Replacing the Top I/O Panel
Follow the instructions in “Before You Begin” on page 1. 6.
Align and replace the top I/O panel.2.
Connect the top I/O panel cables to the connectors on the system board and 3.
master I/O board.
Replace the four screws that secure the top I/O panel to the chassis.4.
Push the panel insert into position.5.
Replace the front bezel (see “Replacing the Front Bezel” on page 6. 92).
Replace the active-venting assembly (see “Replacing the Active-Venting 7.
Assembly” on page 87).
Replace the right side-panel(s) (see “Replacing the Right Side-Panel(s)” on 8.
page 81).
Replace the PCI-Express cards (see “Replacing the PCI-Express Card(s)” on 9.
page 33).