Dell Brocade Adapters - Environmental and Power Requirements

178 Brocade Adapters Installation and Reference Manual
53-1002144-01
Fabric Adapters
5
Environmental and power requirements
This section provides environmental and power specifications for the stand-up Fabric Adapters.
These are low-profile MD2 form factor PCI Express (PCIe) cards, measuring 6.6 in. by 2.731 in.
(16.765 cm by 6.93 cm), that install in PCIe connectors in standard host systems.
Table 22 lists environmental and power specifications for the stand-up type Fabric Adapters.
On
Off
Fast flashing
green
2
Power on
Link established
Receive and Transmit FC activity
Off Slow flashing
green
Off Power on
Port in Ethernet mode
No link
Off On Off Power on
Ethernet link established
No activity
Off On Fast flashing
green
Power on
Link established
Receive and Transmit FCoE activity
Off Fast flashing
green
Off Power on
Link established
Receive and Transmit Ethernet activity only
Off Fast flashing
green
Fast flashing
green
Power on
Link established
Receive and Transmit Ethernet and FCoE activity
1. 1 second on / 1 second off
2. 50 msec on / 50 msec off
TABLE 17 Environmental and power requirements
Property Requirement
Airflow 45 LFM
Altitude Operating - 3,048 meters (10,000 ft.) at 40°C
(104°F)
Nonoperating - 12,192 meters (40,000 ft.) at
25°C (77°F)
Operating Temperature 0°C to 55°C (32°F to 131°F) dry bulb
Operating Humidity 5% to 93%
(relative-noncondensing)
Nonoperating Temperature Minimum: -42°C (-40°F)
Maximum: 73°C (163°F)
Nonoperating Humidity 5% to 95%
(relative-noncondensing)
TABLE 16 LED operation
State