Dell Brocade Adapters - Cabling (Stand-Up Adapters)

Brocade Adapters Installation and Reference Manual 183
53-1002144-01
Converged Network Adapters
5
Cabling (stand-up adapters)
Table 20 lists the supported cabling for adapter transceiver types.
NOTE
Cables are not shipped with the stand-up CNA.
TABLE 20 Transceiver and cable specifications
Transceiver Cable Minimum Length Maximum Length
Ethernet 10 Gbps
SR (short range)
SFP+ 1490 nm
OM1 - 6.25/125 multimode
OM2 - 50/125 multimode
OM3 - 50/125 multimode
OM4 - 50/125 multimode
NA 33m (104.98 ft.)
82m (269 ft.)
300m (984.25 ft.)
550 m (1804 ft.)
Ethernet 10 Gbps
LR (long reach)
SFP+, 10 km, 1310
nm
Single mode media (9 microns) NA 10 km (6.2 mi.)
1m direct-attached
SFP+ copper cable
Copper twinaxial cable 1m (3.2 ft.) 1m (3.2 ft.)
3m SFP+
direct-attached
copper cable
Copper twinaxial cable 3m (9.8 ft.) 3m (9.8 ft.)
5m direct-attached
SFP+ copper cable
Copper twinaxial cable 5m (16.4 ft.) 5m (16.4 ft.)