Dell Brocade Adapters - Adapter LED Operation (Stand-Up Adapters)

184 Brocade Adapters Installation and Reference Manual
53-1002144-01
Converged Network Adapters
5
Adapter LED operation (stand-up adapters)
Figure 19 illustrates LED indicator locations on a Brocade 1020 (A) and a Brocade 1010 (B)
stand-up CNA. LED indicators for each port are visible through the mounting brackets.
FIGURE 19 LED locations for Brocade 1020 CNA (A) and Brocade 1010 CNA (B)
Table 21 describes operation for the following LEDs visible on the CNA:
• Lnk - Link state (up or down).
• Act - Storage or network activity (traffic) is occurring over the Ethernet link.
• Storage (icons) - FCoE activity is occurring over link.
TABLE 21 LED operation
Lnk Act Storage State
Off Off Off Adapter not operational. It may not be powered up or
not initialized.
Slow flashing
green
1
Off Off Adapter is operational, but the physical link is down.
Steady green Off Off Link is up. No Ethernet or storage traffic.
Steady green Off Fast flashing
green
2
Link is up. Storage traffic only.
Steady green Fast flashing
green
2
Off Link is up. Ethernet traffic only.
Steady green Fast flashing
green
2
Fast flashing
green
2
Link is up. Both Ethernet and storage traffic.
Lnk
Act
PORT
01
PORT
0
Lnk
Act
Lnk
Act
AB