Dell Brocade Adapters - Page 232

204 Brocade Adapters Installation and Reference Manual
53-1002144-01
Storage instance-specific persistent parameters
A
TABLE 33 Adapter instance-specific parameters
Function Parameter Default Value Possible Values BCU Command Notes
authorization
algorithm
bfa#-auth-algo 1 1: MD5
2: SHA1
3: MS
4: SM
auth --algo Not supported
in Solaris.
authorization
policy
bfa#-auth-policy off 0: on
1: off
auth --policy Not supported
in Solaris.
authorization
secret
bfa#-auth -secret NA min chars - 0
max chars - 256
auth --secret Not supported
in Solaris.
Adapter
name
bfa#adapter-serialn
um-name
NA min chars - 0
max chars - 64
adapter --name
vHBA
interrupt
coalesce
bfa#-coalesce 1 0: Off
1: On
vhba --intr
vHBA
interrupt
delay
bfa#-delay HBAs - 1125
804 HBA - 25
CNAs - 25
min: 0
max: 1125
vhba --intr
vHBA
interrupt
latency
bfa#-latency HBAs - 225
804 HBA - 5
CNAs - 5
0 microseconds
225 microseconds
vhba --intr
log level bfa#-log-level 3 1: Critical
2: Error
3: Warning
4: Info
log --level
path time out
value (TOV)
bfa#-pathtov 30 min: 1
max: 60
fcpim --pathtov Supported in
release 2.0 and
above.
A value of 0
forces an
immediate
failover. 1 - 60
sets a delay in
seconds.
PCIe
maximum
read request
size
bfa#
pcie-max-read-reqsz
512 128
256
512
1024
2048
Not available This parameter
is used to
determine the
maximum size
of a DMA read
through PCIe.
Supported on
Solaris only.
port
maximum
frame size
bfa#-maxfrsize 2112 512
1024
2048
2112
port --dfsize
port name bfa#-port-name NA min chars - 0
max chars - 64
port --name