2 Installation
14
Set SSL/TLS
Installation of the card reader requires HTTP - SSL/TLS communication between a
network-connected computer and the machine.
1
Click [Security] on the [Properties] screen.
2
Click [Machine Digital Certificate Management].
3
Click [Create New Certificate].
Note • If [Create New Self Signed Certificate] is displayed, click it and go to step 5.
4
Select [Self-Signed Certificate] and click [Continue].
5
On the each menu, make the following settings as necessary:
•Public Key Size
• Issuer
•Days of Validity
6
Click [Apply].
7
Click [SSL / TLS Settings].
To Next Page
