2 Installation
20
Note • Using system credentials to authenticate to an Active Directory LDAP server, you must use
the format “domain\user”.
6
Click [Apply].
7
Click [Reboot Machine] if prompted.
Set Kerberos Server
Configure the Kerberos server settings for authentication.
1
Click [Security] on the [Properties] screen.
2
Click [Kerberos Server] under [Remote Autentication Servers].
3
Check the [Enabled] box for [Server Certificate Validation].
4
On the each menu, make the following settings:
• Primary Server Name/IP Address
• Primary Server Port Number
•Domain Name
5
Click [Apply].
6
Click [Reboot Machine] if prompted.
To Next Page
Loading...
