Installing the system fan
1 Place the fan on the system board.
2 Tighten the M2xL3 screws to secure the fan to the system board.
3 Connect the fan cable to its connector on the system board.
4 Route the WLAN cable onto its routing on the fan.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer.
Audio board
Removing the audio board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a micrSD card
b base cover
c battery
3 To remove the audio board:
a Disconnect the audio board cable from its connector on the system board [1]
b Lift and peel o the black adhesive tape to remove the cable from the system board [2].
c Remove the M2xL3 screw that secures the audio board to the system board [3].
Removing and installing components
13
To Next Page
Loading...
