Installing the LCD Hinge
1 Align the LCD hinges to the screw holes on the computer cover.
2 Tighten the screws to secure the hinges to the metal bracket of the LCD assembly.
3 Install the:
a LCD bezel
b hinge cap
c display assembly
d battery
e base cover
f microSD card
4 Follow the procedure in After working inside your computer
Keyboard
Removing the keyboard
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD
b base cover
c battery
3 Disconnect the keyboard cable from the system board.
4 Hold the sides of the palm rest assembly securely while pushing into the two release holes using a plastic scribe.
34
Removing and installing components
To Next Page
Loading...
