Table 26. Performance (continued)
Option Description
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of
the processor.
● Enable Intel TurboBoost
This option is set by default.
HyperThread Control
Allows you to enable or disable HyperThreading in the
processor.
● Disabled
● Enabled (Default)
Identifier GUID-855F4EB4-ACB0-4BBF-B1DB-5570CF14DF0B
Version 2
Status Released
Power management
Table 27. Power Management
Option Description
AC Recovery Determines how the system responds when AC power is reapplied after a power loss. You
can set the AC Recovery to:
● Power Off—Default
● Power On
● Last Power State
This option is Power Off by default.
Enable Intel Speed Shift
Technology
Allows you to enable or disable Intel Speed Shift Technology support. The option Enable
Intel Speed Shift Technology is set by default.
Auto On Time Sets time to automatically turn on the computer. Time is kept in standard 12-hour format
(hour:minutes:seconds). Change the startup time by typing the values in the time and
AM/PM fields.
NOTE: This feature does not work if you turn off your computer using the switch on a
power strip or surge protector or if Auto Power is set to disabled.
Wake on LAN This option allows the computer to power up from the off state when triggered by a special
LAN signal. This feature only works when the computer is connected to AC power supply.
● Disabled - Does not allows the system to power on by special LAN signals when it
receives a wake-up signal from the LAN.
● LAN - Allows the system to be powered on by special LAN.
● LAN Only - Allows the system to be powered on by special LAN signals.
● LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state,
that will cause the system to wake up and immediately boot to PXE.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep in OS environment. This option is disabled by default.
System setup 47
To Next Page
Loading...
Need help?
General
