Table 32. Maintenance (continued)
Option Description
This option is set by default.
Data Wipe
Allows you to securely erase data from all internal storage devices.
● Wipe on Next Boot
This option is not set by default.
BIOS Recovery
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the
corrupted BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery— Allows you to recover the BIOS automatically.
NOTE: BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
First Power On Date Allows you the set Ownership date. The option Set Ownership Date is not set by default.
Identifier GUID-46E595FF-7ABB-4A6A-8071-F94C4BC71F8F
Version 2
Status Released
System logs
Table 33. System Logs
Option Description
BIOS events
Allows you to view and clear the System Setup (BIOS) POST events.
Identifier GUID-E298F3AA-6EF7-498E-AA75-4AEBC702EAD2
Version 2
Status Released
Advanced configuration
Table 34. Advanced configuration
Option Description
ASPM Allows you to set the ASPM level.
● Auto (default) - There is handshaking between the device and PCI Express hub to
determine the best ASPM mode supported by the device
● Disabled - ASPM power management is turned off at all time
● L1 Only - ASPM power management is set to use L1
PCIe LinkSpeed Allows the user to select the max PCIe link speed.
● Auto (Default)
● Gen 1
● Gen 2
50 System setup
To Next Page
Loading...
