Removing and Installing Parts 103
Replacing the Drive Panel
1
Follow the procedures in "Before You Begin" on page 77.
2
Align the drive panel tabs with the side-door hinges.
3
Rotate the drive panel toward the computer until the sliding plate lever clicks into place and the drive
panel snaps into place on the front panel.
Drives
Your computer supports:
• Two hard drives (Serial ATA)
• Two FlexBay drives (can contain an optional floppy drive and an optional Media Card Reader)
• Two CD or DVD drives
1 sliding plate 2 sliding plate lever 3 drive panel
3
1
2
To Next Page
Loading...
