Contact Us
Shop
Services & Warranties
Support
Resource Cente
ccount
Keyword Search
You are here: Dell USA > Support Home Page
My Account My Order Status
Back to Contents Page
Before You Begin
Dell™ Dimension™ 9200 Service Manual
Getting Started
Recommended Tools
Turning Off Your Computer
Before Working Inside Your Computer
Getting Started
This manual provides procedures for removing and replacing the components in your computer. Unless otherwise
noted, each procedure assumes that the following conditions exist:
z You have performed the steps in Turning Off Your Computer and Before Working Inside Your Computer in this section.
z You have read the safety information in your Dell™ Product Information Guide.
z A component can be replaced by performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
z Small flat-blade screwdriver
z Phillips screwdriver
z Long Phillips screwdriver
z Flash BIOS update program (download from support.dell.com)
Turning Off Your Computer
1. Shut down the operating system:
a. Save and close any open files, exit any open programs, click the Start button, and then click Shutdown.
b. In the Shut Down Windows window, select Shut down.
The computer turns off after the operating system shutdown process finishes.
2. Ensure that the computer and any attached devices are turned off. If your computer and attached devices did
not automatically turn off when you shut down your operating system, press and hold the power button for 4
seconds.
NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off
your computer.
Cart Sign In
Technical Support Customer Service Warranty Information Dell Forums Contact Us
Page 1 of 2Documentation
12/9/2007htt
://su
ort.dell.com/su
ort/edocs/s
stems/dim9200/en/SM
EN/before.htm
To Next Page
Need help?
General
