1 sliding plate 2 sliding plate lever 3 Media Card Reader (optional)
7. Pull the sliding plate to the right and hold in place. Then, slide the drive out the front of the computer.
8. Replace the drive panel (see Installing the Drive Panel).
9. Replace the computer cover (see Replacing the Computer Cover).
Installing a Media Card Reader
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (39 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
