1 mounting screw 2 I/O panel 3 control-panel cable
Installing the I/O Panel
CAUTION: When reinstalling the fan, ensure that you do not pinch the wires that run between the system
board and the fan.
Follow the removal procedure (Removing the I/O Panel) in reverse order, ensuring that the tabs on the top panel,
bottom panel, and front panel are secure.
Processor Fan
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (60 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
