● Two CD or DVD drives
● Two FlexBay drives (can contain an optional floppy drive and optional Media Card Reader)
General Installation Guidelines
Connect hard drives to the connectors labeled "SATA0" and "SATA1", starting with SATA0. Connect CD/DVD drives to
the connectors labeled "SATA4" and "SATA5", starting with SATA4.
Serial ATA hard drives and CD/DVD drives are connected to connectors labeled "SATA0" to "SATA5" on the system board.
1 SATA0 2 SATA1 3 SATA2
4 SATA3 5 SATA4 6 SATA5
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (28 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
