1 heat sink and fan shroud assembly 2 heat-sink assembly bracket 3 captive screw housing (2)
10. Replace the computer cover (see Replacing the Computer Cover).
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into
the computer.
11. Connect your computer and devices to electrical outlets, and turn them on.
I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
I/O-Panel Components
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (55 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
