1 sliding plate 2 floppy drive
Installing a Floppy Drive
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. If you are installing a new floppy drive, remove the shoulder screws from the inside of the drive-panel insert and attach
the screws to the new drive.
1 floppy drive 2 shoulder screws (4)
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (36 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
