Dell Dimension DMC - Connecting a USB Printer

12 Setting Up and Using Your Computer
www.dell.com | support.dell.com
4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard
window appears, click
Cancel .
5 Install the printer driver if necessary. See the documentation that came with your printer.
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1
Complete the operating system setup if you have not already done so.
2 Install the printer driver if necessary. See the documentation that came with your printer.
3 Attach the USB printer cable to the USB connectors on the computer and the printer. The
USB connectors fit only one way.
parallel printer
cable
parallel connector on computer
connector on printer
screws (2)
clips (2)
notches (2)