EasyManuals Logo

Dell Dimension E520 Service Manual

Dell Dimension E520
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Before You Begin: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/before.htm[10/16/2012 1:04:35 PM]
Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own
personal safety.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card.
Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its
edges, not by its pins.
NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is
not authorized by Dell is not covered by your warranty.
NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some
cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs
before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.
1. Turn off your computer. See Turning Off Your Computer
.
NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the
network port or device.
2. Disconnect any telephone or telecommunication lines from the computer.
3. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to
ground the system board.
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
Back to Contents Page

Table of Contents

Other manuals for Dell Dimension E520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Dimension E520 and is the answer not in the manual?

Dell Dimension E520 Specifications

General IconGeneral
MemoryUp to 4GB DDR2 SDRAM
NetworkingIntegrated 10/100 Ethernet
Power Supply305W
ProcessorIntel Pentium D, Intel Core 2 Duo
StorageUp to 500GB SATA HDD
Optical DriveDVD-ROM, DVD+/-RW
GraphicsIntegrated Intel GMA 950
AudioIntegrated 7.1 channel audio
USB Ports8 USB 2.0 ports
Operating SystemWindows XP, Windows Vista
PortsVGA, serial, parallel, PS/2, audio in/out
Expansion Slots1 PCI-e x16, 2 PCI

Related product manuals