Removing and Installing Parts: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
Installing the Drive Panel
1. Follow the procedures in Before You Begin.
1 sliding plate lever 2 sliding plate 3 drive panel
2. Align the drive panel tabs with the side door hinges.
3. Rotate the drive panel toward the computer until it snaps into place on the front panel.
Drives
The computer supports a combination of these devices:
Two serial ATA hard drives
Two serial ATA CD or DVD drives
An optional floppy drive or an optional Media Card Reader
To Next Page
Loading...
