Removing and Installing Parts: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
1 alignment bar 2 fully seated card 3 not fully seated card
4 alignment guide 5 bracket within slot 6 bracket caught outside of slot
8. Before you close the card retention door, ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
1 alignment guide 2 alignment bar 3 release tab
4 card retention door
9. Close the card retention door by snapping it into place to secure the cards.
To Next Page
Loading...
