Removing and Installing Parts: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
1 CD/DVD drive 2 screws (3)
6. Connect the power cable to the drive.
7. Connect the CD/DVD data cable to the drive and to the SATA4 connector on the system board (see System Board
Components).
NOTE: If you are installing a second CD/DVD drive connect the data cable to SATA5.
.
1 power cable 2 data cable
8. Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
To Next Page
Loading...
