Dell E2015HV - Connecting Your Monitor

Setting Up the Monitor  29
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer and disconnect the power cable.
2. Connect the white (digital DVI-D) or the blue (analog VGA) or the
black (DisplayPort) display connector cable to the corresponding
video port on the back of your computer. Do not use three cables at
the same time. Use three the cables only when they are connected to
three dierent computers with appropriate video systems.
Connecting the blue VGA Cable
E2015HV:
E2215HV:
E2715H: