Steps
1. Press the blue side tabs to release the side wall cable holder.
2. Press the center tab to release the bracket from the chassis, and lift it away from the computer.
Installing the left wall bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the left wall bracket and provide a visual representation of the installation
procedure.
Steps
1. Align the guide slots on the side wall bracket with the guides on the computer and slide until the cover is seated firmly.
2. Close the side wall cable holder until the holder clicks into place.
Next steps
1. Install the left control panel.
2. Install the air shroud.
3. Install the cooling fan assembly.
4. Install the system cover.
5. Follow the procedure in After working inside your computer.
54
Removing and installing components
To Next Page
Loading...
