The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options
are:
● Removable Drive (if available)
● STXXXX Drive (if available)
NOTE: XXX denotes the SATA drive number.
● Optical Drive (if available)
● SATA Hard Drive (if available)
● Diagnostics
NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
System setup options
NOTE: Depending on your system and its installed devices, the items that are listed in this section may or may not appear.
Table 3. System setup options—System information menu
Overview
Precision 7960 Rack
Model Name Displays the model name of the system.
BIOS Version Displays the BIOS version number.
Management Engine Version Displays the Management Engine version of the system.
Service Tag Displays the Service Tag of the system.
Manufacturer Displays the Manufacturer information of the system.
Manufacturer Contact Information Displays the Manufacturer contact information of the system.
CPLD Version Displays the CPLD version of the system.
UEFI Compliance Version Displays the UEFI Compliance version of the system.
Table 4. System setup options—Memory Settings menu
Memory Settings
Memory Size Displays the system memory size.
Memory Type Displays the system memory type.
Memory Speed Displays the memory speed.
Video Memory Displays the system video memory.
System Technology Testing Enable or disable the System Technology Testing options.
By default, the option is Disabled.
Memory Operating Mode
By default, Optimizer Mode is enabled.
Current State of Memory Operating
Mode
Displays Optimizer Mode as default.
Node Interleaving Enable or disable the Node Interleaving options.
By default, Fast is enabled.
Memory Training Enable or disable the Memory Training options.
By default, the option is Disabled.
DIMM Self Healing (Post Package Repair)
on
86 BIOS setup
To Next Page
Loading...
