Table 8. System setup options—Boot Settings menu (continued)
Boot Settings
Hard-disk Drive Placeholder Enables or disable the Hard-disk Drive Placeholder .
By default, the Disabled option is selected.
Clean all SysPrep variables and order Displays the Clean all SysPrep variables and order of the system.
By default, the None option is selected.
UEFI Boot Settings Select this menu to configure the Boot Sequence and enable or disable
individual boot options.
Table 9. System setup options—Network Settings menu
Network Settings
UEFI PXE Settings
Number of PXE Devices
By default, 4 drop down is selected.
PXE Device 1 Enables or disable the PXE Device 1.
By default, the Enabled option is selected.
PXE Device 2 Enables or disable the PXE Device 2.
By default, the Disabled option is selected.
PXE Device 3 Enables or disable the PXE Device 3.
By default, the Disabled option is selected.
PXE Device 4 Enables or disable the PXE Device 4.
By default, the Disabled option is selected.
PXE Device 1 Settings This field controls the configuration for PXE device 1.
PXE Device 2 Settings This field controls the configuration for PXE device 2.
PXE Device 3 Settings This field controls the configuration for PXE device 3.
PXE Device 4 Settings This field controls the configuration for PXE device 4.
UEFI HTTP Settings
HTTP Device 1 Enables or disable the HTTP Device 1.
By default, the Disabled option is selected.
HTTP Device 2 Enables or disable the HTTP Device 2.
By default, the Disabled option is selected.
HTTP Device 3 Enables or disable the HTTP Device 3.
By default, the Disabled option is selected.
HTTP Device 4 Enables or disable the HTTP Device 4.
By default, the Disabled option is selected.
HTTP Device 1 Settings This field controls the configuration for HTTP device 1.
HTTP Device 2 Settings This field controls the configuration for HTTP device 2.
HTTP Device 3 Settings This field controls the configuration for HTTP device 3.
HTTP Device 4 Settings This field controls the configuration for HTTP device 4.
UEFI ISCSI Settings
ISCSI Initiator Name
By default, this is blank.
ISCSI Device 1 Enables or disable the ISCSI Device 1.
90 BIOS setup
To Next Page
Loading...
