Table 13. System setup options—System Security menu (continued)
System Security Settings
Bootmanager Password Allow selection for Bootmanager password.
By default, Always option is selected.
TPM Security Allow selection for TPM security.
By default, On option is selected.
- TPM Information
By default, the option is Type: 2.0 NTC.
- TPM Firmware
By default, the option is 7.2.2.0.
- TPM Hierarchy Allow selection of TPM hierarchy.
By default, the Enabled option is selected.
TPM Advanced Settings
Intel(R) TXT Allows selection of Intel(R) TXT.
By default, the Off option is selected.
Memory Encryption Allows selection of Memory Encryption.
By default, the Disabled option is selected.
TME Encryption Bypass Enables or disable the TME Encryption Bypass.
By default, the Disabled option is selected.
Intel(R) SGX
By default, the option is Off.
Power Button Enables or disable the Power button.
By default, the Enabled option is selected.
AC Power Recovery Allows selection of AC Power Recovery.
By default, the Last option is selected.
AC Power Recovery Delay Allows selection of AC Power Recovery.
By default, the Immediate option is selected.
User Defined Delay (120 s to 600 s)
By default, 120 is added.
UEFI Variable Access Allows selection of UEFI Variable Access.
By default, the Standard option is selected.
In-Band Manageability Interface Enables or disable the In-Band Manageability Interface.
By default, the Enabled option is selected.
SMM Security Mitigation Enables or disable the SMM Security Mitigation.
By default, the Disabled option is selected.
SECURE BOOT
Secure Boot Enables or disable the Secure Boot.
By default, the Disabled option is selected.
Secure Boot Policy Allows selection of Secure Boot Policy.
By default, the Standard option is selected.
Secure Boot Mode Allows selection of Secure Boot Mode.
By default, the Deployed Mode option is selected.
BIOS setup 93
To Next Page
Loading...
