Dell EMC E39S Series User Manual

Figure 112. Installing the TPM
Next steps
1. Install the system board.
2. Follow the procedure listed in After working inside your system on page 72.
Initializing TPM for BitLocker users
Steps
Initialize the TPM.
For more information, see http://technet.microsoft.com/en-us/library/cc753140.aspx
The TPM Status changes to Enabled, Activated.
Initializing the TPM 1.2 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9. From the Intel TXT option, select On.
Initializing the TPM 2.0 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.
6. Enter System Setup again.
7. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
162
Installing and removing system components

Dell EMC E39S Series Specifications

General

Brand	Dell
Model	EMC E39S Series
Category	Server
Language	English