Installing and removing system components
Topics:
• Safety instructions
• Before working inside your system
• After working inside your system
• Recommended tools
• Optional front bezel
• System cover
• Drives
• Backplane cover
• Inside the system
• Air shroud
• Cooling fans
• System memory
• NVDIMM-N battery
• Processors and heat sinks
• Expansion cards and expansion card risers
• M.2 SSD module
• Optional IDSDM or vFlash module
• Optional IDSDM or vFlash module
• Network daughter card
• Integrated storage controller card
• Backplane
• Cable routing
• SAS expander card
• Rear drive cage
• System battery
• USB module
• VGA module
• Optional internal USB memory key
• Optical drive (optional)
• Power supply units
• System board
• Trusted Platform Module
• Control panel
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system
by yourself.
WARNING: Opening or removing the system cover while the system is powered on may expose you to a risk of electric
shock.
CAUTION: Do not operate the system without the cover for a duration exceeding five minutes. Operating the system
without the system cover can result in component damage.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
6
Installing and removing system components 71
To Next Page
Loading...
Need help?
General