EasyManua.ls Logo

Dell EMC PowerEdge R6525 - Page 14

Dell EMC PowerEdge R6525
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6. Rear view of the system (continued)
Item Ports, panels, or slots Icon Description
To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
10
OCP NIC port (optional) N/A This port supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
11 NIC port (2) The NIC ports are embedded on the LOM card that is
connected to the system board.
12 BOSS S2 card (optional) N/A This slot supports the BOSS S2 module
For more information about the ports, see the Technical Specificatio ns section.
Figure 8. Rear view of the 8 x 2.5-inch drive system.
Table 7. Rear view of the system
Item Ports, panels, or slots Icon Description
1 Power supply unit (PSU 1) For more information about the PSU configurations, see the
www.dell.com/poweredgemanuals section.
2
PCIe expansion card riser
(slot 1)
N/A
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals section.
3
PCIe expansion card riser
(slot 2)
N/A
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals section.
4 USB 2.0 port (1) This port is USB 2.0-compliant.
5 PCIe expansion card riser
(slot 3)
N/A
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals section.
6 Power supply unit (PSU
2)
For more information about the PSU configurations, see the
Technical Specifications section.
7
VGA port Enables you to connect a display device to the
system. For more information, see the www.dell.com/
poweredgemanuals section.
8 USB 3.0 port (1) This port is USB 3.0-compliant.
14 System overview

Table of Contents

Related product manuals